Product Description
| Material | C1022A |
| Diamter | 3.9mm/4.2mm/4.8mm(#7/#8/#10) |
| Length | 13mm--50mm(1/2”-2”) |
| Finish | Zinc plated |
| Head type | wafer head |
| Thread | Fine |
| Point | drilling point/sharp point |
Packing
1. Bulk: 10000pcs/20kgs/25kgs in a plastic bag, then in carton, in pallet.
2. 200/300/500/1000pieces in a small box, then in carton,without pallet.
3. 200/300/500/1000pieces in a small box, then in carton, with pallet.
4. According to your request.
All packing can be done as per customer!
Head Self Tapping Screw
What is Modify Truss Head Self Tapping Screw?
Phillips modified truss head self tapping screws feature a Phillips drive and a self tapping (TEK) point to pierce through 20 to 14 gauge metals. The threads on these screws also cut their own threads into either wood, plastic or sheet metal. Phillips modified truss head screws feature an over-sized domed head with a flange, similar to an integral washer. Modified truss head screws have a 100 degree undercut which creates a larger area beneath the screw's head for a larger bearing surface.
| Specifications | 4.2 | |
| D | 4-4.3 | |
| P | 1.4 | |
| dc | 10.2-11.4 | |
| K | 2-2.5 | |
| dk | reference value | 7 |
| L1 | reference value | 5 |
| d1 | reference value | 3.2 |
| Slot number | 2 | |
FAQ
1. What is your main products?
Drywall screws, self tapping screws, self driling screws, chipboard screws, blind rivets, common nails, concrete nails..etc
2. What is your delivery time?
It depands, usually it will take around 20 days for 1x20ft. and of course we will finish it within 10 days once we have stock in our warehouse.
3. What is your payment term?
T/T. 30% prepayment in advance and 70% before loading container or as per both side agreement.
4. How is your quality? And what if we don't satisfied your quanlity?
We produce your order strictly by your request. If the quality was not acceptable, we will refund to you.
Company information
Our factory was built in 2006 and we already in this filed of more than 8 years producing, so we promise your our best quality and good service.
We have 50 sets cold heading machine and 35 sets thread rolling machines and 15 sets drilling machines, so we will promise you the leading time will be assured. pls do not worry about this.
Sincerely welcome your visiting our factory and inquiry us, thanks.
Your precious comments and feedback will be highly appreciated by us.
